Once it was cut, we screwed it in to the sides. We then measured the distance between the two sides to get the measurement of the front. We attached each side to a 1×2 that we had secured along the bottom of the cabinets. It was a perfect fit so we went ahead and transferred those measurements to some 3/4″ plywood and cut them on the table saw. We drew the measurements out on a piece of cardboard to create a test template. We then used a straight edge to draw the final side. From the front of the cabinet to the front of the range hood.From the top of the cabinet to the bottom of the range hood.In order to measure the sides we found that drawing a picture really helped! We measured three places: This is of course totally optional, but we wanted to have one nice big open storage space so decided to take it out. We began by using a jigsaw to cut the divider that sat between the cabinets. We simply turned off the power, unscrewed the old one and hooked up the new one. Ours doesn’t vent outdoors, so it was pretty simple to install. I can’t find a link for the one we purchased exactly, but it is very similar in style and price to this NuTone Osmos Convertible Range Hood from Home Depot. Our existing one was also original with the house (aka nearly 30 years old) so we were definitely due for an upgrade! In order for my idea to work, I realized that the old range hood had to go because we needed to have access to the switches from the bottom as opposed to the front. For more info, see my full disclosure here. Supplies Used: (Affiliate links may be provided for convenience. When I started planning out our kitchen makeover I knew that it wasn’t in the budget to have an actual one installed, so faux would be the way to go! Okay, enough with the rambling…let’s talk about this range hood cover!įor years I’ve been swooning over pretty custom vent hoods. (It even gave me the little push that I’ve been searching for to start on our stairs makeover which I’ll share with you guys soon!) Low and behold, I found that it was actually very therapeutic for me and helped me start to feel a little more like myself. Since I knew that some inside pictures would be a must for this tutorial, I busted out the paint can, grabbed my roller and got to work. I kept putting it on my mental “to-do” list, but never got around to it. We worked on it the very last weekend of the One Room Challenge, so I didn’t paint the inside of the cabinet since I was short on time. This past weekend I remembered that I never shared a tutorial on how we assembled our vent hood cover. Aaaaand I’m happy to admit that I am starting to feel that coming on! It happens to me occasionally and while it’s never a fun place to be, I find that when I do start to get back in to the game I come out with a ton of motivation and ready to take on my biggest projects. Explains why it’s been pretty quiet around here and why there haven’t been many new projects for me to share. Ever since completing the kitchen makeover last November I have been stuck in a major rut. Hey everyone! So I have a confession to make.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |